Fixed Type Bucket Milking Machines for Cows – One & Two Can Cluster:

The Fully Indigenous (make in India) Fixed Type Bucket Milking Machine with one /two can cluster assembly consists of a vacuum pumpassembly having a 225 LPMcapacity complete with vacuum tank, regulator, gauge, three vacuum taps, two bends and necessary fittings. The can cluster assembly is complete with one can and can cover, pneumatic pulsatoris set at 70 PPM and have a pulsation ratio of 60:40, 300 cc Flexi Clawmilking unit with vacuum hose, milk hose, twin pulsation tube and short pulsation tube and necessary fittings along with cleaning and disinfecting solutions.

Fixed Type Bucket Milking Machines for Buffaloes – One & Two Can Cluster:

Buffaloes are more difficult to milk than the Holstine or the Jersey cows because they have a very small cisternal fraction of milk and the sphincter muscles guarding the teat cannel are much stronger. It requires a higher vacuum to open the teat canal and empty the teats off milk. An active milk ejection is necessary for milk removal in buffaloes, and this may require stimulation. Milking at high vacuum without milk ejection will suck the teats deep into the milking liners preventing flow of milk and causing considerable stress to the animal. However, if milked at a low vacuum with a lower pulsation rate the tactile stimulation of the milking liners can gently stimulate the buffalo for milk ejection.

Buffalo Milking Cluster

The IDMC Milking Cluster FC300B is especially designed for buffaloes with a stainless-steel claw having the possibility to add on extra weight so as to position the milking unit well on the teats and preventing it from riding upwards and thus preventing pulsation failure.

The other components of the milking machine are similar to cow milking machines however the vacuum and pulsation settings are different.

Mini Milker:

IDMC offers a value to even the smallest farm holder to mechanise his farm with the robust, efficient economic mini milker. The IDMC small capacity low cost “Mini Milker” Bucket Milking Machine is a plug and play device suitable to milk cows in small holder farms with one or two cows but can also be used for milking about 6 to 8 cows in one hour. The Mini Milker is a fully SS 304 machine with a low power consumption (0.75 hp motor) but a high flow vacuum pump having a flow rate of minimum of 150LPM. A special pulsator developed for the Mini Milker the IDMC – the “SHIVA pulsator” has very few moving parts and once installed willoperatetrouble free. The superior 300cc Flexi Claw has been used in the “Mini Milker” thus making it possible to cows high milk flowrates even on small farms. All components of the machine including tubes and connections. It is easy to maintain and easy to use. The Mini Milker are available in Two models, Fixed and Trolley.

Main advantages of Mini Milker:

• Compact and Robust, light yet practically efficient
• Easy for farmer to handle.

General Benefits of Milking machine:

• Easy to Operate
• Efficient, hygienic, and consistent milking
• Comfortable for the animal with no irritation to its teats, tissues, and udder
• Faster and better than hand milking
• Low on maintenance and prompt after-sales service
• Easy to maneuver the trolley model.